If you are looking for a high quality Center Filling Chocolate Depositor, you must not miss LST chocolate depositor. There are small medium and big capacity machines to meet a different output request. Today we are going to talk about the way to set a new recipe for a new chocolate candy on LST One Shot Chocolate Depositor.
There are usually two working mode on a LST chocolate depositor, which is manual mode and auto model.
Manual Mode is usually used to find the Zero position for the machine and test each movement of machine manually.
Automatic Mode is usually used for automatic production according to the selected recipe.
When we need to set a recipe for LST chocolate depositor, we need to follow the following steps.
A. Place the mould under the depositor and Clamp Mould at the correct place. Find the suitable position by manually press Move left/right or up/down. And then save these position to the respective recipe. This point is to make sure the depositor start to deposit at the correct place on the mould.
B. A stands for left side hopper and valve. And B stands for hopper and valve on the right. A side is usually for chocolate and B side is usually for filling. Set A and B depositing amount so the machine will deposit accordingly.
C. There are usually 2 depositing modes, one is Vertical, another is Bar. If you are make a bar, then you select Depositing Mode as Bar, if not, you set it as Vertical so the machine will work accordingly.
D. After depositing amount and mode are set. Then you can save and go back to Home Page and switch to Automatic Mode and then start depositing.
E. Note: you might need to adjust a bit of the depositing amount when you use a newly set recipe.
Generally speaking,LST One Shot Chocolate Depositor is an easy machine to work with. LST has a full range of chocolate machines and solutions for you. Such as chocolate depositing machine, chocolate coating machine, chocolate enrobing machine, chocolate chip machine, chocolate egg machine, etc. Do not hesitate to contact us to know more. You will be happy to work with LST team.
