#China Chocolate Drops Depositing Line
1 The machine head adopts quick assembly and quick disassembly: easy maintenance, quick disassembly, and quick replacement. It can be installed with a sandwich pouring head (small piston rod) or a mixed pouring head (large piston rod). All equipment is more flexible and multi-purpose and can be used for several products. To meet the needs, the next time you make other products, you only need to replace one part. Customer input costs are lower.
Moving head pouring: If the product is relatively large and long, moving pouring can increase the pouring speed. For chocolate with poor fluidity, it can speed up the distribution of the slurry. If you do long casting and move to deposit, it will ensure that the casting sandwich is more uniform and stable.
Why is the casting cost high: our rotary valve and the main body are made of aviation industry aluminum, which is more expensive than copper. It has stronger processing hardness and higher precision, adopts the same surface hardening treatment as a knob, and has a food-grade wear-resistant protective layer on the surface to prevent wear and tear. Our material can be scratched with a scraper and will not be damaged, so the rotary valve and piston rod of the equipment will not be worn and leaked during long-term use. Other peers use cheaper ordinary aluminum, which is prone to wear and leakage.
2 The head can be removed functions:
It is convenient to remove and disassemble the distribution plate. It is simple and quick to replace the distribution plate. The head of the same machine is fixed on the equipment. It is very inconvenient to disassemble the head. After we pull out the machine head, we only need to easily remove the screws below. If the customer has a lift truck, they can directly push the distribution plate to pull the telescopic truck out and pull out the distribution plate, which is easy and safe.
After get off work, the customer wants to clear the excess chocolate in the cylinder, the machine head is moved out, a bucket can be connected below, and the equipment will squeeze the remaining chocolate into the recycling bucket through the automatic cleaning function. Workers can quickly remove the pouring head and cylinder for cleaning and maintenance.
#China Chocolate Drops Depositing Line manufacturers
3 The whole transmission of chain depositing adopts a servo motor, which runs stably, and the position of each mold is very accurate. Even if the chain is stretched and lengthened after many years, the error of the mold can be reduced by parameter correction. Servo soft start will not cause damage to the chain and mold due to sudden start, the equipment is very stable during operation, slow start - a high number of stable movement - deceleration and stop mold, the equipment uses a shield chain during operation, this chain is more than peers The price of the chain used is 2 times higher, the chain strength is high, and it is not easy to deform and replace. Equipment failure will be below. The chain transmission mechanism has a set of tensioning mechanisms, other counterparts do not have it. When the equipment starts, if the chain tension is too low or the tension is too high, it will alarm and stop. If the tension is low, the chain is not tensioned, indicating that the equipment does not have enough air pressure. Chain tension sensor It is by detecting the pressure to keep the cylinder stretching chain to maintain a certain tension. If the chain is not straightened and the equipment is started, the mold may be stuck because it is not stretched, and the mold may be pulled or even the equipment may be damaged. If the chain pressure sensor is higher than a certain tension, it means that the air pressure is too large or the chain is stuck in a position. At this time, the equipment will alarm to indicate that the pressure is too high. The operator can judge the fault and solve the problem by detecting the air pressure and the chain transmission mechanism.
Equipment display link https://youtu.be/nDyH_uDSoO8